Specifications

Output Characteristics

Average Power At Minimum Specified Bandwidth >750 mW
Average Power At 60 nm Bandwidth >450 mW
Bandwidth2 10-60 nm
Tuning Range 780-820 nm3
Repetition Rate (nominal) 84 MHz
Noise4 <0.05%
Stability5 <0.5%
Spatial Mode TEM00
Beam Diameter (1/e2) 1.5 mm
Beam Divergence, full angle <1 mrad
Polarization Horizontal

Footnotes:

  1. Due to our continuous product improvement program, specifications may change without notice.
  2. Bandwidth range accessible by computer control at 800 nm. User specified bandwidth configurations are available.
  3. Center wavelength can be tuned at bandwidths <30 nm; otherwise center wavelength is fixed at 800 nm.
  4. Specification represents RMS noise measured in a 10 Hz to 10 MHz bandwidth.
  5. Percent power drift in any 2-hour period after a 1-hour warm-up.
  6. The Mai Tai SP is a Class IV -- High Power Laser, whose beam is, by definition, a safety and fire hazard. Take precautions to prevent exposure to direct and reflected beams. Diffuse
    as well as specular reflections can cause severe skin or eye damage.

Features

Overview

The Spectra-Physics® Mai Tai® Ti:Sapphire oscillator provides industry leading stability and cutting edge capability to the scientific research community. It is specifically designed as an amplifier seed for Spectra- Physics ultrafast amplifiers. The Mai Tai SP laser incorporates fully automated controls for bandwidth and center wavelength adjustment without the need for manual user intervention.

Unprecedented Level of Performance

This unprecedented level of performance providesa stable, easily adjustable seed source for Spectra-Physics ultrafast amplifier systems. The Mai Tai SP delivers user adjustable, transform-limited pulses and can be used to seed amplifiers in a variety of pulse width configurations (<35 fs - 120 fs).

StabiLok® Active Beam Alignment

The Mai Tai SP is equipped with StabiLok® active beam alignment technology and EternAlign™ adjustment-free mounts to ensure outstanding stability and reliability. When operating under widely varying environmental conditions, the Mai Tai SP maintains the average power,center wavelength, bandwidth, and beam pointing with best-in-class accuracy and precision. In addition,the laser is sealed so there is never a need to clean or realign the internal optics. The Mai Tai SP provides truly hands-free performance.

호환 가능한 파워 센서

Mai Tai SP 레이저의 출력 확인과 분석은, Ophir 3A (7Z02621) 열 전력 센서와 Centauri 레이저 파워 미터를 추천합니다. 이 레이저 측정 장비에 대한 추가 정보는 ophiropt.com 에서 웹사이틍서 찾아 볼 수 있습니다. 다른 Ophir 센서와 미터기도 용도에 따라 Mai Tai SP에 적합할 수 있습니다. 또한 Ophir는 레이저 시스템 개발자들과의 협력을 통해 임베디드 빔 진단법을 구축하여, OEM 솔루션으로서 시스템 성능을 모니터합니다.

Resources

Data Sheets

Drawings & CAD

Application Notes

Literature

사전 설치 가이드