어플리케이션

사양

Output Characteristics

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
Wavelength 355 nm 532 nm 1064 nm
Power2, 3 >50 W @ 1250 kHZ >30 W typical @ 500 kHz
>25 W @ 800 kHz
>20 W typical @ 1 MHz		 >50 W @ 500 kHZ >50 W @ 400 kHZ
Maximum Pulse Energy, typical
(greater pulse energy per burst
possible with TimeShift ps)		 >40 µJ @ 1250 kHz >60 µJ typical @ 500 kHz
>31 µJ @ 800 kHz
>20 µJ typical @ 1 MHz		 >100 µJ @ 500 kHz >200 µJ @ 200 kHz
Repetition Rate Range6 Single shot to 10 MHz
Pulse Width, FWHM2 <12 ps (10 ps typical) <15 ps (13 typical)
TimeShift ps yes
Pulse-to-Pulse Energy Stability2 <2.0%, 1 σ <1.5%, 1 σ
Power Stability (after warm-up)2 <1%, 1 σ, over 8 hours

Beam Characteristics

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
Spatial Mode2 TEM00, M2 <1.3
Polarization >100:1 vertical >100:1 horizontal >100:1 vertical
Beam Diameter (D4σ)2 5.0 ±0.5 mm 3.5 ±0.35 mm 3.0 ±0.3 mm
Beam Divergence, full angle2 <0.20 mrad <0.75 mrad
Beam Asymmetry2 <1.10 (≥90% circularity)
Boresight Tolerance2 ±0.5 mm, ±5 mrad
Beam Pointing Stability2 <±25 µrad/°C

Operating Conditions8

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
Warm-up Time, typical <45 min from warm start mode,<60 min from cold start7 <15 min from start mode, <40 min from cold start7
Temperature Range 15-30°C
Altitude 0-2,000 m
Humidity7 0-90% non-condensing, dew point <19°C

Storage Conditions8

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
Temperature Range 0-50°C
Altitude 0-10,000 m
Humidity7 0-90% non-condensing, dew point <22°C

Electrical and Chiller Requirements7

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
Water Temperature (laser inlet) 20 ±1°C, stable to ± 0.5°C
Water Flow Rate (at laser head) 1.8 GPM typical (6.8 LPM)
AC Input >200 VAC (180-260), 2000 W Max, 50/60 Hz, single phase 100-240 VAC, 1000 W Max, 50/60 Hz, single phase
Heat Load (at laser head) <1600 W <800 W (600 W typical)
Heat Load (at power supply) <300 W <200 W
Total Power Consumption <2000 W <1000 W

Physical Characteristics5

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
Laser Dimensions
(L x W x H)4		 42.14 x 19.88 x 7.63 in
(1070.4 x 504.8 x 193.06 mm)		 35.00 x 12.13 x 7.63 in
(889.0 x 308.0 x 193.8 mm)		 29.50 x 12.13 x 7.50 in
(749.5 x 308.0 x 190.6 mm)
Laser Weight 215 lbs (97.5 kg) 108 lbs (49 kg) 95 lbs (43 kg)
Dimension (Utility Module)
(L x W x H)		 21.16 x 18.98 x 3.47 in (537.5 x 482.1 x 88.1 mm)
Weight (Utility Module) 24.70 lbs (11.20 kg) 22.80 lbs (10.34 kg) 15.00 lbs (6.80 kg)

Features

IceFyre UV50 IceFyre UV30 IceFyre GR50 IceFyre IR50
EU RoHS 2 Compliant, China RoHS 2, CE Compliant Product compliant with restriction of hazardous substances
Internal Power Monitor May be calibrated against an external power meter
Alignment Beam Mode Lower power beam for installation and alignment in a tool(IR requires optional AOM)
Replaceable Output Window Customer replaceable to maintain power in harsh environments
Data Log(includes customer version as well)9 Long and short term recording for diagnostics and equipment maintenance
Optional Safety Shutter Externally mounted for easy field service and customer replaceable
Optional Output AOM NA (Power attenuation by software control. Consult Spectra-Physics) Provides power attenuation at constant power, used with trigger, gate and pulse on demand, use as a process shutter
Optional TimeShift ps GUI Enables waveform customization

Footnotes:

  1. Due to our continuous product improvement program, specifications may change without notice.
  2. IR specifications are at 400 kHz single pulse with the diode current set to achieve 51 W, unless otherwise noted. IceFyre UV30 specifications are at 800 kHz single pulse with the diode current set to achieve 25.5 W, unless otherwise noted. IceFyre UV50 specifications are at 1250 kHz single pulse with the diode current set to achieve >50 W, unless otherwise noted. IceFyre GR50 specifications are at 500 kHz single pulse with the diode current set to achieve >50 W, unless otherwise noted.
  3. IR power shown is without optional AOM.
  4. Dimensions noted do not include the removable lift handles.
  5. AC to DC converter module included with standard system.
  6. Please consult factory for IR operation below 400 kHz without output AOM option.
  7. Warm start: AC, chiller and GUI on, all diodes off.
  8. High temperature, high humidity operation limited to dew point <19°C; high temperature, high humidity storage limited to dew point <22°C.
  9. IceFyre is a Class IV - High-Power Laser, whose beam is, by definition, a safety and fire hazard. Take precautions to prevent exposure to direct and reflected beams. Diffuse as well as specular reflections can cause severe skin or eye damage.
  • Type
    Picosecond Laser
  • Wavelength Region
    VIS
  • Power
    >50 W
  • Pulse Energy
    200 µJ
  • 펄스폭
    ps
  • Wavelength
    1064 nm

기능

Overview

IceFyre® redefines picosecond micromachining lasers with a patent-pending design to achieve exceptional performance and unprecedented versatility at industry leading cost-performance. Based on Spectra-Physics’ It’s in the Box™ design, IceFyre integrates laser and controller into the industry’s smallest package.

Exceptional Performance and Unprecedented Versatility

The IceFyre UV50 is the highest performing UV ps laser on the market, providing >50 W of UV output power at 1.25 MHz (>40 μJ) with 100’s μJ pulse energies in burst mode, and pulse widths of 10 ps. The IceFyre UV50 sets new standards in power and repetition rates from single shot to 10 MHz. The IceFyre UV30 offers >30 W of typical UV output power with pulse energy >60 µJ (greater pulse energies in burst mode) and delivers exceptional performance from single shot to 10 MHz. The IceFyre GR50 delivers >50 W of green output power at pulse energy >100 µJ at 500 kHz. The IceFyre IR50 outputs >50 W of IR power at 400 kHz single pulse and delivers exceptional performance from single shot to 10 MHz.

The IceFyre laser’s unique design exploits fiber laser flexibility and Spectra-Physics’ exclusive power amplifier capability to enable TimeShift™ ps programmable burst-mode technology for the highest versatility and performance in the industry. A standard set of waveforms is provided with each laser; an optional TimeShift ps GUI is available for creating custom waveforms. The laser design enables true pulse-on-demand (POD) and position-synchronized output (PSO) triggering with the lowest timing jitter in its class for high-quality processing at high scan speeds, e.g. when using a polygon scanner.

24/7 연중무휴 산업 안정성

MKS 의 깊은 경험과 기술력을 바탕으로 IceFyre FS 레이저는 높은 신뢰성과 낮은 소유 비용을 담보하기 위한 광범위한 환경 적격성 평가 테스트를 통과 했습니니다. 완전히 자동화된 컴퓨터 제어로, 레이저는 24/7 작동 중에 출력, 빔 파라미터, 그리고 빔 포인팅에서 탁월한 안정성을 보여 까다로운 어플리케이션 분야에서 높은 정밀도와 재현성을 제공합니다.

호환 가능한 파워 센서

IceFyre 레이저의 출력 확인과 분석은, Ophir F80(120)A-CM-17  (7Z07103) 열 전력 센서와 Centauri 레이저 파워 미터를 추천합니다. 이 레이저 측정 장비에 대한 추가 정보는 ophiropt.com 에서 웹사이틍서 찾아 볼 수 있습니다. 다른 Ophir 센서와 미터기도 용도에 따라 IceFyre 에 적합할 수 있습니다. 또한 Ophir 는 레이저 시스템 개발자들과의 협력을 통해 임베디드 빔 진단법을 구축하여, OEM 솔루션으로서 시스템 성능을 모니터합니다.

Recommended Optics & Optomechanics

It is critical to choose the right optics and optomechanical components that work best with your IceFyre laser. IceFyre’s high IR peak power necessitates optics that have a high damage threshold. MKS Newport offers a wide selection of the highest quality optics and optical components covering the entire spectrum UV, VIS, NIR and IR wavelengths to help you with your most challenging applications.

리소스

Technical Articles

Data Sheets

Selection Guides

Drawings & CAD

Application Notes

Literature