Output Characteristics^1,10,11

Footnotes:

1. Due to our continuous product improvements, specifications are subject to change without notice. The specifications only apply when Spitfire Ace is operated with recommended Spectra-Physics seed and pump lasers.
2. A Gaussian pulse shape (0.7 deconvolution factor) is used to determine pulse width (FWHM) from autocorrelation signal as measured with Newport PulseScout® autocorrelator.
3. For alternative pulse widths, please contact Spectra-Physics.
4. Specifications apply when pumped using Spectra-Physics Ascend 60 pump laser. The <1 ps option maximum power >5.0 W.
5. The desired optimum repetition rate must be specified at time of purchase. If additional repetition rates are required, additional optic sets may be required. Any system can be operated (with the same energy per pulse) at reduced repetition rates through internal divide-down electronics.
6. Defined as the ratio between peak intensity of output pulse to peak intensity of any pre-pulse that occurs >1 ns before the output pulse. For higher contrast ratio, please contact Spectra-Physics.
7. Defined as the ratio between peak intensity of output pulse to peak intensity of any post-pulse that occurs >1 ns after the output pulse. For higher contrast ratio, please contact Spectra-Physics.
8. At constant temperature. Variable temperature specifications <20 µrad/°C, peak-to-peak.
9. For wavelength extension through SHG, THG, FHG or OPA, please contact Spectra-Physics.
10. Performance specifications apply at peak of gain curve.
11. The Spitfire Ace/Spitfire Ace PA is a Class IV – High-Power Laser, whose beam is, by definition, a safety and fire hazard. Take precautions to prevent exposure to direct and reflected beams. Diffuse as well as specular reflections can cause severe skin or eye damage.