New Focus波長可変外部共振器ダイオードレーザーは、真の連続モード・ホップ・フリー・チューニングを実現します。Vortex Plus TLB-6800は、精密に調整可能な最高性能の外部共振器ダイオードレーザーです。 Littman-Metcalfキャビティ構成は、優れた安定性とピエゾモードホップフリーチューニングレンジおよび狭線幅を実現します。Vortex Plusは剛性で再現性の高い回転運動をトラストレーションなしに提供するStar-Flexデザインを採用しています。Vortex Plusには、ダイオードと高速の電流変調を直接行うためのSMAポートがあります。ご注文の際は、真空中での正確な中心波長(10pm単位)をご指定ください。製品番号にはレーザーシステムとTLB-6800-LNレーザーコントローラーが含まれます。ヘッドとコントローラーは単品でもご購入いただけます。
- マグネティックダンピングとStar-Flexアクチュエーションにより最高の安定性
- ファイバーカップルオプション
- ファインモードホップフリーチューニング すべての機能を見る
アプリケーション
- 量子物理学
- レーザー冷却
- 原子時計
- 分光法
- 計測学
- 干渉法
仕様
Specifications1
| Model | Wavelength2 | Mode-Hope Free Tuning Range |
Free-Space Output Power |
Fiber-Coupled Output Power |
|---|---|---|---|---|
| TLB-6802-455 | 455-457 nm | >25 GHz (20 pm) | 40 mW @ 455 nm | N/A |
| TLB-6802 | 459-461 nm | >25 GHz (20 pm) | 40 mW @ 461 nm | N/A |
| TLB-6804 | 632.5-640 nm | >120 GHz (160 pm) | 8 mW @ 638 nm | 3 mW @ 638 nm |
| TLB-6811 | 725-741 nm | >100 GHz (200 pm) | 20 mW @ 737 nm | 10 mW @ 737 nm |
| TLB-6813 | 765-781 nm | >100 GHz (200 pm) | 70 mW @780 nm | 35 mW @ 780 nm |
| TLB-6814 | 794-810 nm | >100 GHz (210 pm) | 30 mW @795 nm | 15 mW @795 nm |
| TLB-6817 | 838-853 nm | >90 GHz (220 pm) | 50 mW @ 852 nm | 15 mW @ 852 nm |
| TLB-6818 | 890-940 nm | >90 GHz (240 pm) | 30 mW @ 895 nm | 15 mW @ 895 nm |
| TLB-6820 | 940-990 nm | >80 GHz (250 pm) | 25 mW @965 nm | 12.5 mW @ 965 nm |
| TLB-6821 | 1030-1085 nm | >60 GHz (230 pm) | 70 mW @1064 nm | 24.5 mW @1064 nm |
| TLB-6825 | 1400-1490 nm | >60 GHz (400 pm) | 30 mW @1400 nm | 10 mW @ 1110 nm |
| TLB-6828 | 1520-1630 nm | >50 GHz (400 pm) | 30 mW @1550 nm | 15 mW @1550 nm |
Value
| Value | |
|---|---|
| Linewidth | <200 kHz (50 ms integration time) |
| Wavelength Stability | 2 pm (over 1 hour ±2°C) |
| Power Stability | <1% (over 1 hour ±2°C) |
| Fine Tuning Resolution | 0.01% of full PZT tuning range |
| Fine-Frequency Modulation Bandwidth | <100 Hz (100% of piezo tuning range) <1.5 kHz (20% of piezo tuning range) |
| Current Modulation Bandwidth |
DC-1 MHz (through controller) |
| Longitudinal Mode | Single |
| Transverse Mode | TEM00 |
| Beam Pointing Stability | <50 µrad (±2°C) |
| Beam Size, typical | 1-2 mm |
| Beam Ellipticity, typical | 1:1-2:1 |
| Polarization6 | Vertical |
| Optical Output7 | Free-space, optically-isolated, fiber-coupled |
| User Interface | Controller front panel, RS232, USB |
| Power Supply Requirement | 100-240 VAC (50-60 Hz), power consumption <170 W |
| Environment Temperature, operating | 15-30°C |
| Environment Temperature, storage | 0-50°C |
| Environment Humidity | Non-condensing |
Footnotes:
- Due to our continuous product improvement program, specifications are subject to change without notice.
- Fine tuning only. Select wavelength to 0.01 nm in vaccum. Contact us for all available wavelengths.
- Resolution is 10 mV in PZT (0.01% of full PZT tuning range) through controller front panel or command. When tuning PZT using an external voltage source through External Fre-quency Modulation input, resolution is dependent on voltage source.
- Current modulation directly to diode through laser head SMA port.
- Free space (without isolator) output is vertical linearly polarized with respect to laser head base. Output with optical isolator is 45 degrees with respect to laser head base.
- Optically-isolated option includes an integrated 35 dB optical isolator with approximately 75% power transmission. Fiber-coupled option includes isolator and Panda-type PM fiber with FC/APC connector for laser output. Wide-type alignment key aligned with the slow axis of the PM fiber. This configuration is applicable to the input configuration for the VAMP„¢ tapered amplifier products. Dual stage isolation, other fiber types and connectors available upon request. Fiber couple and optically isolated options unavailable for TLB-6802-455 and TLB-6802.
- TypeExternal Cavity Diode Laser
- 波長Tunable
- パルス幅CW/Quasi CW
- WavelengthFor tuning ranges see specifications
- アプリケーションSemiconductor Manufacturing
- Process TypePhysics Research
- ProcessSemiconductor Metrology
機能
Vortex-plusコントローラー
モデルTLB-6800-LNレーザーコントローラーは、TLB-6800 Vortex Plus波長可変レーザーまたはTLB-7100Vantage™波長可変レーザーのいずれかを制御するように設計されています。 このコントローラーを用いてボタンを押すか、USB / RS-232インターフェイスを介してマウスのクリックで出力またはバイアス電流を簡単に調整することができます。 TLB-6800-LNコントローラーは、アクセスが容易な前面パネルコントロールで他のデバイスと同期するための出力とピエゾスイープを制御する内蔵のファンクションジェネレーターを備えています。
互換性のあるパワーセンサー
Vortex Plus レーザーのパワーを検証および分析するには、Ophir PD300 (7Z02410) または PD300-IR (7Z02412) サーマル センサーおよび Centauri レーザーパワーメーターをお勧めします。このレーザー測定装置に関する追加情報は、ophiropt.com の Web サイトでご確認いただけます。アプリケーションによっては、他の Ophir センサーとディスプレイも Vortex Plus に適している場合があります。 また、 Ophir はレーザーシステム開発者と協力し、OEM ソリューションとしてシステムパフォーマンスをモニターする組み込み型ビームプロファイリングを可能にしています。
リソース
Literature
CW Tunable Lasers Brochure(3.8 MB, PDF) Ultrafast Lasers Brochure(4.6 MB, PDF) フォトニクスベースの量子テクノロジー研究の推進(7.3 MB, PDF)



